Pioneer MEH-P7100R - Manual (Page 52)

51
Initial Setting
Setting the Dimmer (DIM)
To enable this product’s display from being too bright at night, when the vehicle’s head
lights are turned ON the display is dimmed.
You can switch this function ON/OFF.
1. Press the FUNCTION button and select the Dimmer mode (DIM) in the
Initial Setting Menu.
Selecting the Brightness (BRIGHT)
You can select the display brightness. Initially this mode is set to 12. The display shows
“0” – “15”.
Selecting the Illumination Color (ILL)
This product is equipped with two illumination colors, green and red.
You can select the desired illumination color.
1. Press the FUNCTION button and select the Illumination Color mode (ILL)
in the Initial Setting Menu.
2. Select the desired illumination
color with the
2/3 buttons.
2. Select the desired Brightness
with the
2/3 buttons.
1. Press the FUNCTION button and select the Brightness mode (BRIGHT) in
the Initial Setting Menu.
2. Switch the Dimmer ON/OFF
with the
5/∞ buttons.