Adjusting initial settings, Setting the fm tuning step, Switching auto pi seek – Pioneer DEH-P5500MP User Manual

Page 44: Switching the warning tone, Initial settings

Advertising
background image

Adjusting initial settings

1

Initial settings lets you perform initial set up of

different settings for this unit.

1 Function display

Shows the function status.

1 Press SOURCE and hold until the unit

turns off.

2 Press FUNCTION and hold until function

name appears in the display.

3 Press FUNCTION to select one of the in-

itial settings.

Press FUNCTION repeatedly to switch be-

tween the following settings:

FM (FM tuning step)A-PI (auto PI seek)

WARN (warning tone)AUX (auxiliary

input)DIMMR (dimmer)R-SP (rear output

and subwoofer controller)HND-F (handsfree

telephoning)TEL (telephone muting/at-

tenuation)/STDBY (telephone standby)

Use the following instructions to operate each

particular setting.

# To cancel initial settings, press BAND.
# You can also cancel initial settings by holding
down FUNCTION until the unit turns off.

Setting the FM tuning step

Normally the FM tuning step employed by

seek tuning is 50 kHz. When AF or TA is on,

the tuning step automatically changes to 100

kHz. It may be preferable to set the tuning step

to 50 kHz when AF is on.

1 Press FUNCTION to select FM.

Press FUNCTION repeatedly until FM appears

in the display.

2 Press c or d to select the FM tuning

step.

Pressing c or d will switch the FM tuning

step between 50 kHz and 100 kHz while AF or

TA is on. The selected FM tuning step will ap-

pear in the display.

Note

The tuning step remains at 50 kHz during manual
tuning.

Switching Auto PI Seek

The unit can automatically search for a differ-

ent station with the same programming, even

during preset recall.

1 Press FUNCTION to select A-PI.

Press FUNCTION repeatedly until A-PI ap-

pears in the display.

2 Press a or b to turn A-PI on or off.

Pressing a or b will turn A-PI on or off and

that status will be displayed (e.g.,

A-PI :ON).

Switching the warning tone

If the front panel is not detached from the

head unit within five seconds of turning off the

ignition, a warning tone will sound. You can

turn off the warning tone.

Initial Settings

En

44

Section

10

HHHHHHHHHHHHHH

Advertising
This manual is related to the following products: