Setting the fm tuning step 13, Operating this unit, Setting the fm tuning step – Pioneer DEH-281MP User Manual

Page 13

Advertising
background image

3 Press a or b to set the clock.

Pressing a will increase the selected hour or

minute. Pressing b will decrease the selected

hour or minute.

# To cancel clock settings, press BAND.
# You can also cancel clock settings by holding
down AUDIO until the unit turns off.

Turning the clock display on or off

You can turn the clock display on or off.

% Press CLOCK to turn the clockdisplay

on or off.

Each press of CLOCK turns the clock display

on or off.

# The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.

Setting the FM tuning step

The FM tuning step employed by seek tuning

can be switched between 100 kHz, the preset

step, and 50 kHz.

If seek tuning is performed in 50 kHz steps,

stations may be tuned in imprecisely. Tune in

the stations with manual tuning or use seek

tuning again.

1 Press AUDIO to select FM.

2 Press c or d to select the FM tuning

step.

Press c to select 50 (50 kHz). Press d to se-

lect 100 (100 kHz).

Operating this unit

En

13

English

Section

03

Advertising