When connecting to, Separately sold power amp, Connecting the units – Pioneer DEH-P8100BT User Manual
Page 6: When connecting to separately sold power amp
Advertising
6
When connecting to separately sold power amp
Subwoofer output
This product
Antenna jack
Front output
Rear output
IP-BUS input (Blue)
Wired remote input
Hard-wired remote control
adaptor can be connected
(sold separately).
IP-BUS cable
Blue/white
Connect to system control terminal of the
power amp (max. 300 mA 12 V DC).
Blue/white (7*)
Connect to auto-antenna relay control
terminal (max. 300 mA 12 V DC).
The pin position of the ISO connector will
differ depends on the type of vehicle.
Connect 6* and 7* when Pin 5 is an
antenna control type. In another type of
vehicle, never connect 6* and 7*.
Blue/white (6*)
Multi-CD player
(sold separately)
AUX jack (3.5 φ)
Use a stereo mini plug cable
to connect with auxiliary
device.
Connecting the units
Advertising