Power cable connection, Connecting the units – Pioneer DEH-P800BT User Manual

Page 4

Advertising
background image

3

Connecting the Units

Connect leads of the same
color to each other.

Yellow (3*)
Back-up
(or accessory)

Red (5*)
Accessory
(or back-up)

1*

2*

4*

3*

5*

Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.

Microphone

Antenna jack

4 m

15 cm

Cap (1*)
Do not remove cap if this
terminal is not in use.

Yellow (2*)
Connect to the constant 12 V
supply terminal.

Orange/white
Connect to lighting switch terminal.

Red (4*)
Connect to terminal controlled by
ignition switch (12 V DC).

Black (chassis ground)
Connect to a clean, paint-free metal location.

Notes:

• Change the initial setting of this unit (refer to the Operation

Manual). The subwoofer output of this unit is monaural.

• When using a subwoofer of 70 W (2

Ω) , be sure to connect

with Violet and Violet/black leads of this unit. Do not connect
anything with Green and Green/black leads.

ISO connector
Note:
In some vehicles, the ISO connector
may be divided into two. In this
case, be sure to connect to both
connectors.

The pin position of the ISO connector will differ depends on the
type of vehicle. Connect 6* and 7* when Pin 5 is an antenna
control type. In another type of vehicle, never connect 6* and 7*.

iPod with Dock
Connector

Dock connector port

Dock connector

Power cable connection

Advertising