Pioneer DEH-P5630MP User Manual
Page 5
Fig. 12
Abb. 12
Afb. 12
1*
2*
4*
3*
5*
10.
3. Subwoofer output or
non fading output
34.
4. Antenna jack
1. This product
2. Front output
5. Fuse
7. IP-BUS input
(Blue)
8. IP-BUS cable
Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
11. Connect leads of the same
color to each other.
12. Cap (1*)
When not using this terminal,
do not remove the cap.
13. Yellow (3*)
Back-up
(or accessory)
14. Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
15. Red (5*)
Accessory
(or back-up)
16. Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
17. Orange/white
To lighting switch terminal.
18. Black (ground)
To vehicle (metal) body.
19. ISO connector
Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to
connect to both connectors.
20. Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
21. Speaker leads
White
: Front left +
White/black: Front left ≠
Gray
: Front right +
Gray/black : Front right ≠
Green
: Rear left + or Subwoofer +
Green/black: Rear left ≠ or Subwoofer ≠
Violet
: Rear right + or Subwoofer +
Violet/black: Rear right ≠ or Subwoofer ≠
22. Connecting cords with RCA pin
plugs (sold separately)
9. Multi-CD player
(sold separately)
23. Power amp
(sold separately)
23. Power amp
(sold separately)
24. Blue/white
To system control terminal of
the power amp (max. 300 mA
12 V DC).
25. System remote control
26. Blue/white (7*)
To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).
27. Blue/white (6*)
28. The pin position of the ISO connector will differ
depends on the type of vehicle. Connect 6* and 7*
when Pin 5 is an antenna control type. In another
type of vehicle, never connect 6* and 7*.
29. Front speaker
29. Front speaker
30. Left
31. Right
32. Subwoofer
32. Subwoofer
33. Perform these connections when using
the optional amplifier.
Note:
Change the initial setting of this unit (refer
to the Operation Manual). The subwoofer
output of this unit is monaural.
6.Jack for Wired Remote Control
Please see the Instruction Manual for the
Wired Remote Control (sold separately).
XRD7007A_JS 03.9.12 10:52 AM Page 17