Making an audio recording, Listening to your system 04 – Pioneer A-A9MK2-K User Manual
Page 13
Listening to your system
04
13
En
English
Français
Deutsch
Nederlands
Italiano
Español
Making an audio recording
You can make an audio recording from any
audio source connected to the amplifier.
1
Select the source you want to record.
Use the input select buttons (
INPUT
SELECTOR).
2
Prepare the source you want to record.
Tune to the radio station, load the CD, set up
the turntable, etc.
3
Prepare the recorder.
Insert a blank tape, MD, etc. into the recording
device and set the recording levels.
1
Refer to the instructions that came with the
recorder if you are unsure how to do this.
4
Start recording, then start playback of the
source component.
Note
1 The amplifier’s volume, balance and tone controls have no effect on the recorded signal.
A9MK2_SYXCN5.book 13 ページ ２００９年４月３日 金曜日 午後７時１０分