Pioneer CT-L77 - Manual (Page 11)

2 Installing and Connecting Up
11
AM loop antenna
Power cable
FM wire antenna
Connecting the antennas
Connecting the supplied antennas will allow you to listen to both AM and FM radio
broadcasts. If you find that reception quality is poor, an outdoor antenna should give
you better sound quality — see the Connecting external antennas box on the
following page for more on how to do this.
Before making or changing antenna connections, make sure that the power is
switched off and the unit disconnected from the AC wall outlet.
1 Pull off the protective shields of both AM antenna wires.
2 Pull open both tabs and insert one wire fully into each terminal.
3 Snap the tabs shut to secure the AM antenna wires.
Place the AM antenna on a flat surface and point in the direction giving the best
reception. If necessary, stabilize with a pen or pencil through the hole near the base.
Avoid placing near computers, television sets or other electrical appliances (including
the display unit of this system), and do not let it come into contact with metal objects.
It’s also possible to fix the AM antenna to a wall using two small screws or pins
through the two holes at the top of the loop. Before fixing, make sure that the
reception is satisfactory.
1
2
3