Pioneer AVX-7300 - Manual (Page 12)

11
Installation
ENG/MASTER 96 INST
12
2. Fastening the unit to the factory radio mounting bracket.
(Fig. 11) (Fig. 12)
Select a position where the screw holes of the bracket and the screw holes of this product
become aligned (are fitted), and tighten the screws at 2 places on each side. Use any of
binding screws (4
´ 3 mm), binding screws (5 ´ 6 mm) or flush surface screws (5 ´ 6
mm), depending on the shape of the screw holes in the bracket.
*1 Use binding screws (4 ´ 3 mm) only.
Fig. 11
Fig. 12
11
13
12
*1 *1
Screw
Dashboard or Console
Factory radio mounting bracket
1_CRD3481A_EW_Eng 09-05-2001 08:55 Page 12