Pioneer DEH-P4500R User Manual

Page 5

Advertising
background image

Fig. 12

Abb. 12

Afb. 12

1*

2*

4*

3*

5*

9.

3. Subwoofer output or

non fading output

33.

4. Antenna jack

1. This product

2. Front output

5. Fuse

6. IP-BUS input

(Blue)

7. IP-BUS cable

Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.

10. Connect leads of the same

color to each other.

11. Cap (1*)

When not using this terminal,
do not remove the cap.

12. Yellow (3*)

Back-up
(or accessory)

13. Yellow (2*)

To terminal always supplied
with power regardless of
ignition switch position.

14. Red (5*)

Accessory
(or back-up)

15. Red (4*)

To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.

16. Orange/white

To lighting switch terminal.

17. Black (ground)

To vehicle (metal) body.

18. ISO connector

Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to
connect to both connectors.

19. Yellow/black

If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.

20. Speaker leads

White

: Front left +

White/black: Front left ≠
Gray

: Front right +

Gray/black : Front right ≠
Green

: Rear left + or Subwoofer +

Green/black: Rear left ≠ or Subwoofer ≠
Violet

: Rear right + or Subwoofer +

Violet/black: Rear right ≠ or Subwoofer ≠

21. Connecting cords with RCA pin

plugs (sold separately)

8. Multi-CD player

(sold separately)

22. Power amp

(sold separately)

22. Power amp

(sold separately)

23. Blue/white

To system control terminal of
the power amp (max. 300 mA
12 V DC).

24. System remote control

25. Blue/white (7*)

To Auto-antenna relay control terminal
(max. 300 mA 12 V DC).

26. Blue/white (6*)

27. The pin position of the ISO connector will differ

depends on the type of vehicle. Connect 6* and 7*
when Pin 5 is an antenna control type. In another
type of vehicle, never connect 6* and 7*.

28. Front speaker

28. Front speaker

29. Left

30. Right

31. Subwoofer

31. Subwoofer

32. Perform these connections when using

the optional amplifier.

Note:
Change the initial setting of this unit (refer
to the Operation Manual). The subwoofer
output of this unit is monaural.

CRD3696A_JS 7/31/02 17:01 Page 17

Advertising