Pioneer X-SMC11-S - Manual (Page 35)

Additional information 11
35
En
About iPod/iPhone/iPad
Bluetooth technology works with iPhone 5, iPhone 4S, iPhone
4, iPhone 3GS, iPhone 3G, iPhone, iPad (3rd and 4th
generation), iPad 2, iPad mini, and iPod touch (2nd through
5th generation).
The Lightning connector works with iPhone 5, iPod touch (5th
generation), and iPod nano (7th generation).
USB works with iPhone 5, iPhone 4S, iPhone 4, iPhone 3GS,
iPhone 3G, iPhone, iPad (3rd and 4th generation), iPad 2, iPad
mini, iPod touch (1st through 5th generation) and iPod nano
(3rd through 7th generation).
“Made for iPod,” “Made for iPhone,” and “Made for iPad”
mean that an electronic accessory has been designed to
connect specifically to iPod, iPhone, or iPad, respectively, and
has been certified by the developer to meet Apple
performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and
regulatory standards. Please note that the use of this
accessory with iPod, iPhone, or iPad may affect wireless
performance.
iPad, iPhone, iPod, iPod nano and iPod touch are trademarks of
Apple Inc., registered in the U.S. and other countries.
Lightning is a trademark of Apple Inc.
About apt-X
© 2012 CSR plc and its group companies. The aptX ® mark and
the aptX logo are trade marks of CSR plc or one of its group
companies and may be registered in one or more jurisdictions.
Auto power off setting
Long press the  on the unit for 3 seconds to switch auto
power off setting ON/OFF.
The operation can be conducted using only the  on the unit.
No need to set this using the remote control.
Initial setting is set to ON.
Note
• When the auto power off is set to ON, “APD ON” will be
displayed on the main display.
• When the auto power off is set to OFF, “APD OFF” will be
displayed on the main display.
Restoring all the settings to the
defaults
Use the steps below to restore all the settings to their defaults.
Conduct the operation without any disc inserted (“NO DISC”).
1 Press  STANDBY/ON to turn the power on.
2 Press CD on the remote control or INPUT
repeatedly on the main unit to select CD input.
3 Press  STANDBY/ON and ■
simultaneously.
Use the buttons on this unit’s top panel. “DEFAULT” is
displayed while the settings are being restored. Power is
turned off.