Pioneer AVR-W6100 - Manual (Page 28)

27
Connecting the System
Connecting the Power Cable
Power cable
Fuse holder (4 A)
Light green/black
Connect to the Dome Light Switch’s – lead
wire.
White/yellow
Connect to the Door Switch.
Light green/red
Connect to the Dome Light Switch’s + lead
wire.
Yellow
To the terminal always supplied with power
regardless of ignition switch position.
Red
To the electric terminal controlled by the igni-
tion switch (12 V DC) ON/OFF.
Do not connect this lead to power source termi-
nals to which power is continuously supplied.
If the lead is connected to such terminals, the
battery may be drained.
Black (ground)
To vehicle (metal) body.
Note:
• A car’s door switch polarity depends
on the car. For details, consult the
vehicle’s Owner’s Manual or ask the
dealer. For details, consult the vehicle
Owner’s Manual or dealer.
Fuse resistor
This product
30 cm
30 cm
30 cm
6 m
6 m
1.5 m