Adjusting loudness, Using subwoofer output, Adjusting subwoofer settings 27 – Pioneer DEH-P3100UB User Manual

Page 27: Audio adjustments, Adjusting subwoofer settings

Advertising
background image

Frequency
Low:

40HZ

—80HZ—100HZ—160HZ

Mid:

200HZ

—500HZ—1KHZ—2KHZ

High:

3KHZ

—8KHZ—10KHZ—12KHZ

Q factor
2W

—1W—1N—2N

# You can also perform the same operations by
pushing

MULTI-CONTROL up or down.

Adjusting loudness

Loudness compensates for deficiencies in the
low- and high-sound ranges at low volume.

1

Use MULTI-CONTROL to select

LOUDNESS in the audio function menu.

2

Press MULTI-CONTROL to display the

setting mode.

3

Use MULTI-CONTROL to select the de-

sired setting.
Turn to change the setting.
LOW (low)

—MID (mid)—HIGH (high)—OFF

(off)

# You can also perform the same operations by
pushing

MULTI-CONTROL up or down.

4

Press MULTI-CONTROL to determine

the selection.

# Even if the menu has been cancelled before
determination, operation is settled.

Using subwoofer output

This unit is equipped with a subwoofer output
which can be turned on or off.
Also, phase can be selected between normal
and reverse.

1

Use MULTI-CONTROL to select

SW SETTING 1.

2

Press MULTI-CONTROL to display the

setting mode.

3

Use MULTI-CONTROL to select the de-

sired setting.
Turn to change the setting.
NORMAL (normal phase)

—REV (reverse

phase)

—OFF (subwoofer off)

# You can also perform the same operations by
pushing

MULTI-CONTROL up or down.

4

Press MULTI-CONTROL to determine

the selection.

# Even if the menu has been cancelled before
determination, operation is settled.

Adjusting subwoofer settings

When the subwoofer output is on, you can ad-
just the cut-off frequency and the output level
of the subwoofer.
! When the subwoofer output is on, you can

select

SW SETTING 2.

1

Use MULTI-CONTROL to select

SW SETTING 2.

2

Press MULTI-CONTROL to display the

setting mode.

3

Press MULTI-CONTROL to select the seg-

ment you wish to set.
Press

MULTI-CONTROL repeatedly to switch

the segment in the following order:
Cut off frequency

—Level

4

Turn MULTI-CONTROL to adjust the se-

lected segement.
Cut off frequency
50HZ

—63HZ—80HZ—100HZ—125HZ

Level
+6 to

–24 is displayed as the level is increased

or decreased.

# You can also perform the same operations by
pushing

MULTI-CONTROL up or down.

Audio Adjustments

En

27

English

Section

03

Advertising
This manual is related to the following products: