Before you start, What’s in the box, Loading the batteries in the remote control – Pioneer DV-220V-K User Manual

Page 5

Advertising
background image

En

5

<J2M22501A>

Before

you

start

5

Before you start

What’s in the box

 Remote Control
 Audio/ video cable
 Power cable
 AA batteries (R6) x 2
 Warranty card
 Operating instructions (this document)

Loading the batteries in the

remote control

Open the rear lid and insert the batteries
as shown on the diagram below.

To close the rear lid, line up the catch with the groove and slide
in the direction of the arrow (

).

Notes

 Do not use any batteries other than the ones

specified. Also, do not use a new battery together with
an old one.

 When loading the batteries into the remote control,

set them in the proper direction, as indicated by the
polarity marks ( and ).

 Do not heat batteries, disassemble them, or throw

them into flames or water.

 Batteries may have different voltages, even if they are

the same size and shape. Do not use different types of
batteries together.

 To prevent leakage of battery fluid, remove the

batteries if you do not plan to use the remote control
for a long period of time (1 month or more). If the fluid
should leak, wipe it carefully off the inside of the case,
then insert new batteries. If a battery should leak and
the fluid should get on your skin, flush it off with large
quantities of water.

 When disposing of used batteries, please comply with

governmental regulations or environmental public
institution’s rules that apply in your country/ area.

WARNING

Do not use or store batteries in direct sunlight or other
excessively hot place, such as inside a car or near
a heater. This can cause batteries to leak, overheat,
explode or catch fire. It can also reduce the life or
performance of batteries.

Advertising