Pioneer PDP-42RXE - Manual (Page 31)

09 Adjustments and Settings
English
31
En
Item | button \ button
Bass For weaker bass For stronger bass
Treble For weaker treble For stronger treble
Balance Decreases audio from Decrease audio from
the right speaker the left speaker
5 Press the EXIT button.
• If you make any adjustment to the “ Bass” or “Treble”, the “Effect” is
automatically switched to “ User”. Also, if you make any adjustment
to the “ Balance”, the “Effect” is not switched.
Adjusting the Volume Automatically
This feature allows you to automatically adjust the volume of
every channel by lowering the sound output when the
modulation signal is high or by raising the sound output when
the modulation signal is low.
1 Press the MENU button.
2 Press the c or d button to move to Sound, then press
the a or OK button.
3 Select Auto Volume Level and press the a or OK button
again.
4 Press the c or d button to select the required option (On
or Off), then press the b or BACK button.
On
Off
Sound
Effect Flat
Bass
50
Treble 50
Balance R 1
Auto Volume Level Off
SRS TruSurround XT On
Adjust Return
5 Press the EXIT button.
Setting the Surround Sound
You can enjoy the virtual surround sound effect.
1 Press the MENU button.
2 Press the c or d button to move to Sound, then press
the a or OK button.
3 Press the c or d button to move to SRS TruSurround
XT, then press the a or OK button.
4 Press the c or d button to select the required option (On
or Off), then press the b or BACK button.
On
Off
Sound
Effect Flat
Bass
50
Treble 50
Balance R 1
Auto Volume Level Off
SRS TruSurround XT On
Adjust Return
5 Press the EXIT button.
is a trademark of SRS Labs, Inc. TruSurround XT
technology is incorporated under license from SRS Labs, Inc.
Changing the Screen Size
You can change the aspect ratio of the screen to correspond to
your viewing requirements.
1 Press the MENU button.
2 Press the c or d button to move to Screen, then press
the a or OK button.
3 Select Screen Size and press the a or OK button again.
4 Press the c or d button to select the required aspect
ratio as follows, then press the b or BACK button.
Auto - 4:3 - Full - Wide - Zoom - Full 14:9 - Cinema 14:9
Auto
4:3
Full
Wide
Zoom
Full 14:9
Cinema 14:9
Screen
Screen Size Auto
Main Input ANALOG CH
PIP/TWIN
AV1 Input VIDEO
AV2 Output ANALOG CH
Screen Saver
Adjust Return
Auto
Cinema 14:9
Full
Wide
Full 14:9 Zoom
4:3
Item Description
Auto In this mode, the Plasma Display automati-
cally selects an appropriate screen size when
the received video signals contain WSS (wide
screen signaling) information.
4:3 For 4:3 "standard" pictures. A side mask
appears on each side.
Full For 16:9 squeeze pictures.
Wide In this mode the picture is progressively
stretched toward each side of the screen.
Zoom For 16:9 letterbox pictures. Bars may appear
on the top and bottom with some
programmes.
Full 14:9 For 14:9 squeeze pictures. A thin side mask
appears on each side.
Cinema 14:9 For 14:9 letterbox pictures. A thin side mask
appears on each side, and you may also see
bars on the top and bottom with some
programmes.
10-PDP42RXE-Eng (28-34) 9/30/05, 12:16 PM 31