Pioneer DCS-580 - Manual (Page 14)

Getting started 02
14
En
Memorizing stations
You can save up to 30 station presets so that
you always have easy access to your favorite
stations without having to tune in manually
each time.
1 Tune to an AM or FM radio station.
Select mono or auto-stereo reception (FM) as
necessary. These settings are saved along with
the preset.
2 Press SHIFT+SETUP and use / to
choose ‘ST.MEM.’ then press ENTER.
3 Use / to select the station preset you
want then press ENTER.
Listening to station presets
1 Make sure the TUNER function is
selected.
2 Use the ST +/– buttons to select a station
preset.
• You can also use the number buttons to do
this.
Listening to other sources
You can connect auxiliary sources (TV, satellite
receiver, etc.) to this unit for playback through
the speaker system. See Connecting auxiliary
components on page 34 for more on this.
• To connect a USB device to the USB
terminal, see USB playback on page 25.
1 Make sure that the external source (TV,
satellite receiver, etc.) is switched on.
2 Press LINE to select the source.
Each press switches between LINE1, LINE2
and LINE3.
3 If necessary, start playback of the source.
DCS-580_EN.book 14 ページ ２００８年２月２９日 金曜日 午後８時４１分