Pioneer AVIC-F840BT - Manual (Page 8)

Connecting the system
The navigation unit
Wired remote input
Please refer to the
instruction manual
for the Hard-wired
remote control
adapter (sold
separately).
Vehicle Bus adapter input
Please refer to the instruction
manual for the Vehicle Bus
adapter (sold separately).
Power cord
For connection, refer to the wiring and
installation manual separately supplied.
Audio source will be set to mute or attenuate, while the
following sounds will not be muted or attenuated. For details,
refer to Operation Manual.
— voice guidance of the navigation
— incoming ringtone and incoming voice of the mobile
phone that is connected to this navigation system via
Bluetooth wireless technology
15 cm
Note
RCA connector
Yellow/black
If you use an equipment with mute
function, connect that equipment to the
Audio Mute lead. If not, keep this lead free
of any connections.
RDS-TMC tuner
Vehicle aerial
Fuse (10 A)
Aerial jack
30 cm
30 cm
1 m
13 cm
Engb
8
Section
02 Connecting the system