Pioneer AVH-P4000DVD - Manual (Page 44)

Setting the TV signal
When this unit is connected to a TV tuner, you
need to adjust the TV signal suitable to your
country TV signal setting.
! This function is initially set to AUTO so that
this unit automatically adjusts the TV signal
setting.
! About your country TV signal, consult with
your nearest Pioneer dealer.
1 Touch NEXT on the initial menu.
2 Touch TV SIGNAL to select an appropri-
ate TV signal.
Touching
TV SIGNAL switches TV signal set-
tings in the following order:
AUTO
—PAL—SECAM
Entering PIN code for Bluetooth
wireless connection
To connect your cellular phone to this unit via
Bluetooth wireless technology, you need to
enter PIN code on your phone to verify the
connection. The default code is
0000, but you
can change this in this function.
! With some Bluetooth audio players, you
may be required to enter the Bluetooth
audio player PIN code in advance to set
this unit for a connection.
! You can only operate this function when
Bluetooth adapter (e.g. CD-BTB200) is con-
nected to this unit.
1 Touch NEXT on the initial menu.
2 Touch PINCODE INPUT.
PIN code input display appears.
3 Touch 0 to 9 to input the PIN code of
your Bluetooth audio player.
# To cancel the inputted numbers, touch C.
4 After inputting PIN code (up to 16 di-
gits), touch ENTER.
The PIN code you entered is stored in this sys-
tem.
Correcting distorted sound
You can minimize distortion that may be
caused by the equalizer curve settings.
Setting an equalizer level high can cause dis-
tortion. If high sound is crippled or distorted,
try switching to
LOW. Normally, leave the set-
ting at HIGH to ensure quality sound.
! Only when the multi-channel processor
(e.g., DEQ-P6600) is connected to this unit,
you can operate this function.
1 Touch NEXT on the initial menu.
2 Touch DIGITAL ATT to switch the digital
attenuator setting.
Touch
DIGITAL ATT repeatedly until the de-
sired setting appears in the display.
! HIGH – High quality sound
! LOW – Minimize distortion sound
Resetting the audio functions
You can reset all audio functions except vo-
lume.
! Only when the multi-channel processor
(e.g., DEQ-P6600) is connected to this unit,
you can operate this function.
1 Touch NEXT on the initial menu.
2 Touch AUDIO RESET.
3 Touch RESET.
4 Touch RESET again to reset audio func-
tions.
# To cancel resetting the audio functions, touch
CANCEL.
Operating this unit
En
44
Section
03