Pioneer SPH-DA01 - Manual (Page 16)

Parts supplied
Parts marked (*) are pre-installed.
The display unit Holder*
Side bracket*
(2 pcs.)
Truss head screw
(5 mm × 6 mm)
(8 pcs.)
Flush surface screw
(5 mm × 7 mm)
(4 pcs.)
Screw*
(2.6 mm × 5 mm)
(4 pcs.)
Screw for fixing the
side bracket*
(5 mm × 7 mm)
(4 pcs.)
Double-ended screw
Rubber bush Trim ring
Before installing this product
% Remove the holder.
Loosen the screws (2.6 mm × 5 mm) to re-
move the holder.
Holder
Screw (2.6 mm × 5 mm)
Engb
16
Section
03 Installation