Pioneer KEH-P7020R - Manual (Page 4)

Note:
Depending on the kind of vehicle, the function
of 3* and 5* may be different. In this case, be
sure to connect 2* to 5* and 4* to 3*.
Cap (1*)
When not using this terminal,
do not remove the cap.
ISO connector
Fuse
1*
2*
4*
3*
5*
Yellow (2*)
To terminal always supplied
with power regardless of
ignition switch position.
Red (4*)
To electric terminal controlled
by ignition switch (12 V DC)
ON/OFF.
Yellow (3*)
Back-up
(or accessory)
Red (5*)
Accessory
(or back-up)
Black (ground)
To vehicle (metal) body.
Orange/white
To lighting switch terminal.
Connect leads of the same
color to each other.
Note:
In some vehicles, the ISO connector may be
divided into two. In this case, be sure to
connect to both connectors.
Multi-CD player
(sold separately)
IP-BUS cable
TEL terminal
Refer to a Handsfree Telephone Unit’s
manual (sold separately).
Subwoofer output
or Non Fading Output
IP-Bus input
(Blue)
Antenna
jack
Yellow/black
If you use a cellular telephone, connect it via the
Audio Mute lead on the cellular telephone. If not,
keep the Audio Mute lead free of any connections.
Front output
Rear output
This Product
16 cm
16 cm
16 cm
3
Connecting the Units