Specifications – Pioneer GM-D8400M User Manual

Page 13

Advertising
background image

ENGLISH

ESPAÑOL

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

кмллдав

12

Power source ........................................................................................................ 14.4 V DC (10.8 V to 15.1 V allowable)
Grounding system .......................................................................................................................................... Negative type
Current consumption .................................................................................................... 27.0 A (at continuous power, 4

Ω)

Average current drawn* .......................................................................................................... 7.5 A (4

Ω for one channel)

15.0 A (2

Ω for one channel)

Fuse ........................................................................................................................................................................ 30 A

× 2

Dimensions ........................................................................................................ 290 mm (W)

× 56 mm (H) × 200 mm (D)

(Terminals not included)

Weight .................................................................................................................... 3.2 kg (Leads for wiring not included)
Maximum power output .......................................................................................... 600 W

× 1 (4 Ω) / 1 200 W × 1 (2 Ω)

Continuous power (14.4 V) .................................................................. 4

Ω, 20 Hz to 240 Hz, 1.0 % THD, 300 W × 1

2

Ω, 50 Hz, 1.0 % THD, 600 W × 1

Load impedance ........................................................................................................................ 4

Ω (2 Ω to 8 Ω allowable)

Frequency response .......................................................................................................... 10 Hz to 240 Hz (+0 dB, –3 dB)
Signal-to-noise ratio ...................................................................................................................... 80 dB (IEC-A network)
Distortion .......................................................................................................................................... 0.3 % (10 W, 100 Hz)
Low pass filter ............................................................................................................ Cut off frequency: 40 Hz to 240 Hz

Cut off slope: –12 dB/oct

Bass Boost .............................................................................................................................................. Frequency: 50 Hz

Level: 0 dB to 12 dB

Gain control .................................................................................................................................... RCA: 200 mV to 6.5 V

Speaker: 0.8 V to 26 V

Maximum input level / impedance ...................................................................................................... RCA: 6.5 V / 22 k

Speaker: 26 V / 90 k

Note:

• Specifications and the design are subject to possible modification without notice

due to improvements.

*Average current drawn

• The average current drawn is nearly the maximum current drawn by this unit

when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.

Specifications

Advertising