Pioneer DJS User Manual

Page 92

Advertising
background image

92

DJS Ver. 1.000

8

Using SD Cards

Transferring DJS Music to SD Cards

Contents

Index

3

Click the check boxes of songs you wish to
transfer from the computer to the SD memory
card.

• Once you click a box, a check mark is displayed in it.
• Selected songs are displayed in a light blue-green in the

SD list.

Selecting or Clearing All Songs

Select All Songs: Click [Select All].
Clear All Songs: Click [Clear All].

4

Click the [Transfer Start] button.

• As soon as the transfer begins, the [Transfer Start] button

turns into the [Stop] button.

• While a song is being transferred, it is shown in orange.

5

Once transfer is completed, the number of
remaining copies displayed in the song
information decreases by 1.

• Songs that have been transferred are shown in a dark blue-

green.

The status of each track in the SD list is indicated as follows.

10: Saving to the Original SD Card
11: Transfer Complete
12: Transfer Complete
13: Transferring
14: Awaiting Transfer (Not Complete)
15: Awaiting Transfer (Not Complete)
16: Awaiting Transfer (Not Complete)

When transferring any
category

Click on the check box of any category
in the category list displayed on the left
side.

Warning!

Amount of Transferable
Song Data

Make sure that the [Required SD] is
within the SD card’s free space
[Available SD].

Stopping Transfer

The transfer is stopped if you click the
[Stop] button.

Once a song has been transferred, its

check mark disappears, while the check
marks of songs being transferred or
awaiting transfer remain intact.

Restarting Transfer while
Paused

Click the [Transfer Start] button.

Formatting SD Cards

1. Click [File] and then click [SD

Memory Card] – [Format].

2. After you confirm the information

about the SD Memory Card and what
kind of formatting to do, click the
[Format] button.

3. After reading the warning message,

click the [OK] button. The
[FORMAT]
screen is displayed.

* To cancel during formatting, click the

[Cancel] button.

4. After formatting finishes, click the

[Close] button.

Advertising