Using bluetooth wireless technology, Operating this unit – Pioneer MVH-350BT User Manual

Page 8

Advertising
background image

AUDIO BOOK (audiobook speed)

1 Press M.C. to display the setting mode.
2 Turn M.C. to select your favorite setting.

! FASTER – Playback at a speed faster than

normal

! NORMAL – Playback at normal speed
! SLOWER – Playback at a speed slower

than normal

S.RTRV (sound retriever)

Automatically enhances compressed audio and
restores rich sound.
1 Press M.C. to select the desired setting.

For details, refer to Enhancing compressed
audio and restoring rich sound (sound retriever)
on the previous page.

Using Bluetooth wireless
technology

Only for MVH-350BT

Using Bluetooth telephone

Important

! Since this unit is on standby to connect with

your cellular phone via Bluetooth wireless
technology, using it without the engine run-
ning can drain the battery power.

! Operations may vary depending on the kind

of cellular phone.

! Advanced operations that require attention

such as dialing numbers on the monitor,
using the phone book, etc., are prohibited
while driving. Park your vehicle in a safe
place when using these advanced opera-
tions.

! Be sure to park your vehicle in a safe place

and apply the parking brake when perform-
ing this operation.

Setting up for hands-free phoning

Before you can use the hands-free phoning
function you must set up the unit for use with
your cellular phone.

1 Connection

Operate the Bluetooth telephone connection
menu. Refer to Connection menu operation on
this page.

2 Function settings

Operate the Bluetooth telephone function
menu. Refer to Phone menu operation on the
next page.

Basic operations

Making a phone call
1 Refer to Phone menu operation on the next

page.

Answering an incoming call
1 When a call is received, press

.

Ending a call
1 Press

.

Rejecting an incoming call
1 When a call is received, press and hold

.

Answering a call waiting
1 When a call is received, press

.

Switching between callers on hold
1 Press M.C.

Canceling call waiting
1 Press and hold

.

Adjusting the other party

’s listening volume

1 Press c or d while talking on the phone.
! When private mode is on, this function is not

available.

Turning private mode on or off
1 Press BAND/ while talking on the phone.

Notes

! If private mode is selected on the cellular

phone, hands-free phoning may not be avail-
able.

! The estimated call time appears in the dis-

play (this may differ slightly from the actual
call time).

Storing and recalling phone numbers

1

If you find a phone number that you

want to store to memory, press and hold
down one of the preset tuning buttons (1/
to 6/

) to store it to the relevant preset

tuning button.
The functions below can be used to store phone
numbers to the memory. For details, refer to
Phone menu operation on the next page.

! MISSED (missed call history)
! DIALLED (dialed call history)
! RECEIVED (received call history)
! PHONE BOOK (phone book)

2

Press one of the preset tuning buttons

(1/

to 6/

) to recall the desired phone

number.

3

Press M.C. to make a call.

Switching the display

Selecting the desired text information
You can change the display during a call.
1 Press DISP to cycle between the following:

! Call time
! Name of other party
! Number of other party

Using voice recognition

This feature can be used on an iPod equipped
with voice recognition that is connected by
Bluetooth with the source set to

iPod or

BT AUDIO.

% Press and hold M.C. to switch to voice
recognition mode.
The commands available with this unit are listed
below.

! Song playback
! Making a phone call

Note

For details on voice recognition features, check
the manual for the iPod you are using.

Connection menu operation

Important

! Be sure to park your vehicle in a safe place

and apply the parking brake when perform-
ing this operation.

! Connected devices may not operate properly

if more than one Bluetooth device is con-
nected at a time (e.g. a phone and a separate
audio player are connected simultaneously).

1

Press and hold

to display the con-

nection menu.

# You cannot operate this step during a call.

2

Turn M.C. to select the function.

Once selected, the following functions can be
adjusted.

Operating this unit

8

Section

Operating this unit

En

02

Advertising