Pioneer XDJ-AERO - Manual (Page 7)

7
2. Effect
No XDJ-AERO buttons
SAMPLE LAUNCH
indicator status
Function When SHIFT button is on
e BEAT control — Effect Parameter1 Effect Select
f FX SELECT
(TRANS)
Lit dimly Effect On/Off —
Lit brightly Hot Cue1 Delete Hot Cue1
Flashing
Deck 1,3 : Sampler1 Play/Stop —
Deck 2,4 : Sampler5 Play/Stop —
g FX SELECT
(FLANGER)
Lit dimly Flanger On/Off —
Lit brightly Hot Cue2 Delete Hot Cue2
Flashing
Deck 1,3 : Sampler2 Play/Stop —
Deck 2,4 : Sampler6 Play/Stop —
h FX SELECT
(ECHO)
Lit dimly
Windows Echo Effect On/Off —
Mac OS Effect On/Off —
Lit brightly Hot Cue3 Delete Hot Cue3
Flashing
Deck 1,3 : Sampler3 Play/Stop —
Deck 2,4 : Sampler7 Play/Stop —
i FX SELECT
(ROLL)
Lit dimly BeatGrid On/Off —
Lit brightly Hot Cue4 * 5 Delete Hot Cue4 * 5
Flashing
Deck 1,3 : Sampler4 Play/Stop —
Deck 2,4 : Sampler8 Play/Stop —
j SHIFT Effect Parameter2 Sampler Volume
*5 Though not displayed on the default skin, the fourth hot cue can be operated.
3. Mixer * 6
No XDJ-AERO buttons Function
k TRIM control Input Gain
l EQ [HI] control EQ (Hi)
m EQ [MID] control EQ (Mid)
n EQ [LOW] control EQ (Low)
o FILTER control Filter
p Channel fader Channel Fader
q HEADPHONES CUE * 7 Monitor On/Off
r Crossfader Cross Fader
s Crossfader curve
THRU Disabled
Full
Scratch
t AUTO MIX button Automatic mixing On/Off
4. Others
No XDJ-AERO buttons Function
u INFO/UTILITY button DECK Change A C * 6
v INFO/UTILITY button DECK Change B D * 6
w TIME/AUTO CUE Switch Time/Remain
*6 Operates when this unit’s mixer mode is set to “PC”. When the mixer mode is set to “PC”, deck switching is possible with the INFO/UTILITY
button and the four decks can be operated. VirtualDJ’s 4-deck skin is displayed when “VirtualDJ 7 [4 Decks]:XXXXxXXXX” is selected at
“CONFIG” “Skins”.
*7 When monitoring the sound over headphones, set the HEADPHONES MIX control in VirtualDJ Pro 7 to 0 %.
• “-” is indicated for operations that cannot be used because no functions are assigned.
• The amount of change in the sound and playing speed when such operations as scratching and pitch bending are performed differs
from when operations are performed on this unit alone.
• The various functions of VirtualDJ Pro 7 can be assigned to buttons on this unit by changing the mapping. For details, refer to the
VirtualDJ Pro 7’s operating instructions
<DRX1026-A>