Pioneer SEP-C1 - Manual (Page 4)

4
En
<For Windows 2000>
• If the [ Digital Signature Not Found] message appears
during installation, click on the [ Yes] button to continue the
installation process.
5 When installation is completed, the [Installation is now
complete.] message will appear. Click on the [Finish] button
to complete the process.
[3] Connecting the SEP-C1 to a computer
Use a USB auxiliary power cable to connect the 5V connector
on the rear side of the SEP-C1 to one of the computer’s USB
ports, then use another USB cable to connect the PC
connector on the rear of the SEP-C1 to another of the
computer’s USB ports.
When the SEP-C1 is first connected to a computer or when the
computer’s USB port is reconnected, the message [
Installing
device driver software] may appear on the computer
monitor. In this case, simply wait until the message [
Your
devices are ready for use] is displayed.
<For Windows XP>
• During the installation process, if the computer displays the
message [ Can Windows connect to Windows Update to
search for software?] select [No, not this time], then click
on the [
Next] button to continue the installation process.
• During installation, if the computer displays the message [ What
do you want the wizard to do?] select [Install the software
automatically (Recommended)], then click the [Next] button
to continue installation.
• If the [ Hardware Installation] message appears during
installation, click on [ Continue Anyway] to continue the
installation process.
<For Windows 2000>
• If the [
Digital Signature Not Found] message appears during
installation, click on the [ Yes] button to continue the installation
process.