Specifications – Pioneer GM-X354 User Manual

Page 13

Advertising
background image

Specifications

Power source .......................................................................................................... 14.4 V DC (10.8 — 15.1 V allowable)
Grounding system .......................................................................................................................................... Negative type
Current consumption .................................................................................................... 18.1 A (at continuous power, 4

Ω)

Average current drawn* ........................................................................................................ 6.6 A (4

Ω for four channels)

9.0 A (4

Ω for two channels)

Fuse .............................................................................................................................................................................. 25 A
Dimensions ...................................................................................................................... 279 (W)

× 58 (H) × 237 (D) mm

Weight .................................................................................................................... 3.6 kg (Leads for wiring not included)
Maximum power output .................................................................................................................... 70 W

× 4 / 140 W × 2

Continuous power output ........................................................................ 45 W

× 4 / 100 W × 2 (DIN45324, +B=14.4 V)

Load impedance .......................................................................................................................... 4

Ω (2 — 8 Ω allowable)

(Bridge connection: 4 — 8

Ω allowable)

Frequency response .......................................................................................................... 10 — 50,000 Hz (+0 dB, –1 dB)
Signal-to-noise ratio .................................................................................................................... 100 dB (IEC-A network)
Distortion ........................................................................................................................................ 0.008% (10 W, 1 kHz)
Separation ...................................................................................................................................................... 65 dB (1 kHz)
Low pass filter .............................................................................................................................. Cut off frequency: 80 Hz

Cut off slope: –12 dB/oct

High pass filter ............................................................................................................................ Cut off frequency: 80 Hz

Cut off slope: –12 dB/oct

Maximum input level/impedance .................................................................................. RCA: 6.5 V/22 k

Ω (0.4 — 6.5 V)

Speaker: 26 V/40 k

Ω (1.6 — 26 V)

Note:

• Specifications and the design are subject to possible modification without notice

due to improvements.

*Average current drawn

• The average current drawn is nearly the maximum current drawn by this unit

when an audio signal is input. Use this value when working out total current
drawn by multiple power amplifiers.

12

ENGLISH

ESPAÑOL

DEUTSCH

FRANÇAIS

ITALIANO

NEDERLANDS

Advertising