Pioneer DVH-340UB - Manual (Page 17)

Resume playback (Bookmark)
By using the Bookmark function, you can resume
playback from a selected scene the next time the disc
is loaded.
! This function is available for DVD video.
1 During playback, press 2/ at the point you want
to resume playback next time.
The selected scene will be bookmarked so that
playback resumes from that point next time. You
can bookmark up to five discs. After that, the old-
est bookmark is replaced by the new one.
To clear the bookmark on a disc, press and hold
2/
during playback.
Notes
! You can also perform this operation by press-
ing BOOKMARK on the remote control.
! You can also bookmark a disc by pressing and
holding h (eject) at the point you want to
bookmark. Next time you load the disc, play-
back will resume from the bookmarked point.
Note that you can only bookmark one disc
using this method. To clear the bookmark on a
disc, press h (eject).
Changing audio language during
playback (Multi-audio)
With DVDs that provides audio playback in different
languages and different audio systems (Dolby Digital,
DTS, etc.), you can switch between languages/audio
systems during playback.
! This function is available for DVD video, DivX and
MPEG-4.
1 Press 5/
during playback.
The audio selection icon is displayed for eight
seconds.
2 Press 5/ while the audio selection icon is dis-
played.
The audio changes each time you press
5/ .
Notes
! You can also perform this operation by press-
ing AUDIO on the remote control.
! With some DVDs, DivX and MPEG-4, switch-
ing between languages/audio systems may
only be possible using a menu display.
! You can also switch between languages/audio
systems using DVD setup menu. For details,
refer to Setting the audio language on page 23.
! Only digital output of DTS audio is possible. If
the unit
’s optical digital outputs are not con-
nected, select an audio setting other than
DTS.
! Display indications such as Dolby D and Mch
indicate the audio system recorded on the
DVD, DivX and MPEG-4. Depending on the
setting, playback may not be with the same
audio system as that indicated.
! Performing this operation during fast forward/
fast reverse, pause or slow motion playback
returns you to normal playback.
Changing the subtitle language
during playback (Multi-subtitle)
With DVDs featuring multi-subtitle recordings, you
can switch between subtitle languages during play-
back.
! This function is available for DVD video, DivX and
MPEG-4.
1 Press 6/
during playback.
The subtitle selection icon is displayed for
eight seconds.
2 Press 6/
while the subtitle selection icon is dis-
played.
The subtitle language changes each time you
press
6/ .
Notes
! You can also perform this operation by press-
ing SUBTITLE on the remote control.
! With some DVDs, DivX and MPEG-4, switch-
ing between subtitle languages may only be
possible using a menu display.
! You can also switch between subtitle lan-
guages using DVD setup menu. For details,
refer to Setting the subtitle language on page
23.
! Performing this operation during fast forward/
fast reverse, pause or slow motion playback
returns you to normal playback.
En
17
Section
02
Operating
this
unit
Operating this unit