Pioneer GEX-500DVB - Manual (Page 6)

6
Installing the GEX-500DVB Receiver
Befor e installing
When installing this product and the other multimedia components, ensure suitable cable routing and that the
required cable length is available.
Allow ample space for plugging the connector plug into and out of the DVB-T tuner when doing the positioning of
the tuner. Video/Audio connections should be located for easy access in future.
Position both brackets underneath the tuner housing and screw them on using the casing screws supplied.
Then attached the DVB-T receiver at a suitable point using the self-tapping screws provided.
As an alternation to fasten with screws (recommended), the Velcro strips supplied can be used to fasten
the DVB-T receiver.
Infrar ed Remote Sensor (IR r eceiver )
Installing location
Location for installing can be anywhere but make sure there are no objects in between the IR receiver and remote
control during normal control from the user’s position.
1.
Determine the installation position for the IR receiver.
To pr event injur y in the event of an accident. Do not install components in the inflation r ange of the
air bag or in ar eas wher e the head or knees may knock against them.
2.Use methyl alcohol (spirit) to clean installation surfaces.
3.Remove protective foil from the underside of the adhesive pad, place IR receiver in the desired position and press
it down firmly.
Note: installation temperature should be at least 25 Celsius so that the adhesive pad can develop its full adhesive
strength.
INSTALLATION