Black Box V.11 LS - Manual (Page 2)

724-746-5500 blackbox.com
BLACK BOX
®
2 of 2 09/13/2011
#21463
» Supports up to eight high-speed receive-only
devices at once.
» Gives you data-rate buffering capabilities
up to 10 mbps, and at greater distances.
» Continuously broadcasts receive data,
receive timing, and a control signal
from the data source.
» Uses no software or data processors.
» Ideal for VSAT Data/Clock Broadcasting.
» Tandem DB15 connectors enable you
to cascade without losing user ports.
» Compatible with V.35, RS-422/449, RS-530
and RS-485 equipment.
» 3-year warranty.
FeatureS
The BLACK BOX ® V.11 LS can bring high-speed data broadcasting
to your network.
The V.11 LS is an excellent choice for your business if you’re
planning to implement real-time applications. More companies are
going this route today, and the
V.11 LS will help you stay competitive.
Designed for companies that need an increased level of speed in
their receive-only applications, the hardware device delivers data-rate
buffering capabilities up to 10 mbps and simultaneously supports
up to eight receive-only terminals.
The V.11 interface is compatible with balanced interfaces
for V.35, RS-422/449, RS-530, and RS-485.
Moreover, the V.11 LS can support data transmissions at far
greater distances than RS-232 and is transparent to the data stream.
It’s more reliable, too. The device’s master port features tandem
DB-15 connectors, which allow the V.11 LS to be cascaded without
losing any subchannel ports. It continuously broadcasts Receive Data,
Receive Timing, and Indicate control signals from the data source to
the eight output terminal ports. It also has a high Mean Time Between
Failure (MTBF) rate—over 100,000 hours. That’s more than 11 years.
Operation is easy. Simply plug a male DB-15 cable into the female
DB-15 input port on the back panel, then insert up to eight male
DB-15 connectors into the 1 through 8 ports. Data, Clock, and
Indicate are received on the master port and broadcast out
simultaneously on the 1–8 ports.
To assist operation and diagnostics, the V.11 LS features four
green LED indicators on its front panel. The Power indicator lights
up when the AC voltage is applied to the box, and three adjacent
LEDs illuminate when receiving data, clock and the user-defined
control signal. You know the control signal is present when the
Indicate LED glows.
Housed in a sturdy aluminum enclosure, the V.11 LS is supplied
with an internal linear power supply. It also contains a 110/120 VAC
rotary select switch at its rear. And the device can operate on standard
power found in all countries.
OVERVIEW
Typical Application
The V.11 LS is an ideal when you have to continuously update
public data displays or distribute continuous, noncritical data to
multiple LANs, PCs, or receive-only printers. With a high MTBF
rate, it’s also the right choice for distributors and resellers who
depend on a reliable data stream to keep their high-volume
businesses running.
What’s included
✦ V.11 LS data broadcasting unit.
✦ User manual.
✦ USA-grounded power cord, Part # 71305.
Item Code
V.11 LS tL576a
You may also need…
DB15 Cable with EMI/RFI Protection, Male to Male
6-ft (1.8-m) eGM15e-0006-MM
10-ft. (3.0-m) eGM15e-0010-MM
20-ft. (6.0-m) eGM15e-0020-MM
TL576A
Application — Multiple synchronous
broadcasting of Data, Clock, &
Indicate
Compliance — UL ® 1950, FCC
Class A, CE for Europe approvals
MTBF — >100,000 hours
Data Format — Data transparent
at all data rates
Data Rates — Up to 10 mbps
Maximum Altitude —
Up to 10,000 ft. (3,048 m)
CE Approval — Yes
RoHS — Yes
Interface — ITU V.11 compliant, X.21
Connectors — Subchannel ports:
(8) DB15 female;
Master ports: (1) DB15 male,
(1) DB15 female
Indicators — Front panel:
Power, Data, Clock & Indicate
Temperature — Operating:
32 to 122°F (0 to 50°C)
Humidity — 5 to 95%,
non-condensing (relative)
Power — 100–120 to 200–220 VAC,
50/60 Hz selectable
Size — 1.8"H x 17"W x 9"D
(4.6 x 43.2 x 22.9 cm)
Weight — 4.5 lb. (2 kg)
T e c h S P e c S