Pioneer DV-343 - Manual (Page 23)

23
En
GETTING ST
AR
TED USING YOUR DVD PLA
YER
1
Press STOP
7 (7 on the front panel).
Playback stops.
2
Press OPEN/CLOSE (
0 on the front panel).
The disc tray comes out.
3
Remove the disc.
4
Press ( STANDBY/ON on the front
panel).
The disc tray goes back in.
0 4
¢ 1 ¡
7 8 3
Stopping Playback and
Switching Power Off
– DVD/Video CD/CD
RANDOM PROGRAM SEARCH MODE
0 9 8 7
+10 6 5 4
CLEAR 3 2 1
1 REV FWD ¡
PLAY 3 PAUSE 8 STOP 7
e STEP/SLOW E
NEXT ¢ PREV 4
RETURN
REPEAT
CONDITION
MEMORY
LAST
MEMORY
ANGLE SUB TITLE AUDIO
SETUP MENU TOP MENU
DISPLAY
¶
5
∞
3 2
Î
¶
OPEN/
CLOSE
REPEAT
A-B
¶
¶ 5
5
5 5
EN TER
¶
¶
STANDBY/ON
DVD PLA YER
Î
3 8 7 ¡ ¢ 4 1 0 COMPONENT VIDEO OUTPUT
4
1
2
4 3 2 1
Use the resume feature to restart playback from the
point that the disc was stopped last time.
Press STOP
7 once.
The display shows “RESUME” and the stop position is
memorized.
• The resume position remains memorized as long as
the disc is in the player — even if you switch the
power off.
• Pressing STOP 7 twice causes the disc to return to
the beginning when PLAY
3 is pressed again. The
display shows the disc type (DVDs or Video CDs)
Press PLAY 3.
Playback starts from the resume position.
Notes
• The actual restart position may be slightly before or after
the resume position.
• If you want to remove the disc, but still want to resume
playback from the last stopped position, use the LAST
MEMORY feature instead (page 45).
Resuming playback from
where you stopped
– DVD/Video CD