Pioneer PDP-615EX - Manual (Page 35)

English
30
En
Specifications
Specifications
Screen Size 1351(H) ן760(V) mm
53.2"(H) ן29.9"(V) inches
diagonal 61"
Aspect Ratio 16 : 9
Resolution 1365(H) ן768(V) pixels
Signals
Synchronization Range Horizontal : 15.5 to 110 kHz
(automatic : step scan)
Vertical : 50.0 to 120 Hz
(automatic : step scan)
Input Signals RGB, NTSC (3.58/4.43), PAL (B,G,M,N),
PAL60, SECAM, HD*
1 , DVD* 1 , DTV* 1
Input Terminals
PC
Visual 1 (Analog) mini D-sub 15-pin
ן1
Visual 2 (Analog) BNC (R, G, B, H/CS, V)
ן1* 2
Video
Visual 1 BNC
ן1
Visual 2 RCA-pin
ן1
Visual 3 S-Video:DIN 4-pin
ן1
COMPONENT
Visual 1 RCA-pin (Y, PB[CB], PR[CR])
ן1* 1
Visual 2 BNC (Y, PB[CB], PR[CR])
ן1* 1, * 2
HDMI HDMI connector* 3
Audio Stereo RCA
ן3 (Selectable)
RS-232C D-sub 9-pin
ן1
Sound output 9W+9W at 6 ohm
Power Supply AC220-240V 50/60Hz
Current Rating 3.7A (maximum)
Power Consumption 540W (typical) (standby 1.8W)
Dimensions 1502 (W)
ן912 (H)ן126(D) mm
59.1 (W)
ן35.9 (H)ן5.0 (D) inches
Weight 68.0 kg / 149.9 lbs (without stand)
Environmental Considerations
Operating Temperature 0°C to 40°C / 32°F to 104°F
Other Features Motion compensated 3D Scan Converter (NTSC,
PAL, 480I, 576I, 525I, 625I, 1035I, 1080I), 2-3
pull down Converter (NTSC, 480I, 525I, 1035I,
1080I (60Hz)), 2-2 pull down Converter (PAL,
576I, 625I, NTSC, 480I, 525I), Digital Zoom
Function (100-900% Selectable), Self Diagnosis,
Image Burn reduction tools (ABL, INVERSE,
WHITE, ORBITER, SCREEN WIPER), Color
Temperature select (high/middle/middle low/low,
user has 4 memories), Auto Picture, Input Skip,
Color MGT, Low Tone (3 mode), Gamma
Correction (4 mode), Plug and play (DDC1,
DDC2b, HDMI:E-DDC), Split screen operations
The features and specifications may be subject to change without
notice.
* 1 COMPONENT input signals supported on this system
480P (60 Hz)
480I (60 Hz) 525P (60 Hz)
525I (60 Hz) 576P (50Hz) 576I (50Hz)
625P (50Hz) 625I (50Hz) 720P (60 Hz)
1035I (60 Hz) 1080I (50 Hz) 1080I (60 Hz)
* 2 The 5-BNC connectors are used as PC2 and COMPONENT2 input.
Select one of them under “BNC INPUT”.
* 3 HDMI input signals supported on this system.
Supported Signals
• 640
؂480P @ 60Hz
• 1920
؂1080I @ 50Hz
• 1280
؂720P @ 60Hz
• 720
؂576P @ 50Hz
• 1920
؂1080I @ 60Hz
• 1440 (720)
؂576P @ 50Hz
• 720
؂480P @ 60Hz
• 1280
؂720P @ 50Hz
• 1440 (720) ؂480I @ 60Hz
Note: In some cases a signal on the plasma monitor may not be displayed
properly. The problem may be an inconsistency with standards from
the source equipment (DVD, Set-top box, etc...). If you do experience
such a problem please contact your dealer and also the manufacturer of
the source equipment.