Pioneer FH-P6600R - Manual (Page 50)

Using the Digital Signal Processor (DSP)
2. Recall the Equalizer curve you want to adjust (refer to previous section).
3. Adjust the Equalizer curve.
Display shows “+6” – “–5”.
Note:
• Adjustment range is subject to the curve.
• You can store the equalizer curve in CUSTOM by pressing button 5 for 2 seconds.
7 11-Band Graphic Equalizer Adjustment
You can select this mode only when you select CUSTOM.
1. Recall CUSTOM. (Refer to previous section.)
2. Press the DSP button and select the 11-Band Graphic Equalizer Adjustment
mode (50Hz) in the DSP Menu 1.
Note:
• Adjustment range is subject to the curve.
5. Repeat steps 3-4 above for the other band adjustments.
Note:
• You can create different CUSTOM for different sources. (The Built-in CD Player and Multi-CD
Player are set to the same Equalizer Adjustment setting automatically.)
4. Adjust the level with the
5/∞
buttons.
Display shows “+6” – “–6”.
3. Select the band to be adjusted
with the
2/3 buttons.
50
Ф 80 Ф 160 Ф 250 Ф 500
Ф 800 Ф 1.2k Ô 2.5k Ô 4.0k
Ô 8.0k Ô 12.5k (Hz)
49