Pioneer SC-1223-S - Manual (Page 40)

40
04
Basic Setup
Operable settings/items Descriptions Page
Other functions
INPUT SELECT (INPUT SELECTOR)
Switches the input. 42
VOLUME +/–, MUTE Use to set the listening volume. 42
LISTENING MODE Selects your favorite listening modes. 50
PQLS Plays using the PQLS function. 62
PHASE (Phase Control) Plays with phase shifting in the low range corrected. 53
SOUND RETRIEVER AIR
Switches the input to ADAPTER PORT and plays compressed sound
with high sound quality.
48
iPod iPhone iPad DIRECT CON-
TROL Switches the input to iPod/USB and sets the mode allowing operation
from the iPod.
43
4 When you’re finished, press RETURN.
You will return to the Home Menu.
Changing the OSD display language (OSD Language)
The language used on the Graphical User Interface screen can be changed.
! The explanations in these operating instructions are for when English is selected for the GUI screen.
! The OSD display is only displayed when the receiver’s HDMI OUT 1 terminal and the TV’s HDMI input are
connected with an HDMI cable. If the TV is connected with anything other than an HDMI cable, watch the front
panel display while performing the various operations and making settings.
1 Press u STANDBY/ON to switch on the receiver and your TV.
Make sure that the TV’s video input is set to this receiver (for example, if you connected this receiver to the VIDEO
jacks on your TV, make sure that the VIDEO input is now selected).
2 Press on the remote control, then press HOME MENU.
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
3 Select ‘System Setup’ from the Home Menu.
4 Select ‘OSD Language’ from the System Setup menu.
5 Select the desired language.
6 Select ‘OK’ to change the language.
The setting is completed and the System Setup menu reappears automatically.
About the Home Menu
This receiver’s Home Menu (HOME MENU) can be used to make various settings and to check and adjust items
that have been set.
! The OSD display is only displayed when the receiver’s HDMI OUT 1 terminal and the TV’s HDMI input are
connected with an HDMI cable. If the TV is connected with anything other than an HDMI cable, watch the front
panel display while performing the various operations and making settings.
% To display the Home Menu screen, press on the remote control, then press
HOME MENU.
1. Advanced MCACC
2. MCACC Data Check
3. Data Management
4. System Setup
5. Network Information
6. Operation Mode Setup
Exit Return
HOME MENU
A/V RECEIVER
A Graphical User Interface (GUI) screen appears on your TV. Use i/j/k/l and ENTER to navigate through the
screens and select menu items. Press RETURN to exit the current menu.
The top level in the Home Menu is as shown below. Refer to the respective explanations to set, check and adjust
as necessary.
! Advanced MCACC – Use this to make automatic settings and detailed manual settings for the surround
sound. For details, see Making receiver settings from the Advanced MCACC menu on page 79 .
! MCACC Data Check – This displays the Advanced MCACC measurement results. Use it to check the MCACC
memory. For details, see Checking MCACC Data on page 83 .
! Data Management – Use this to manage the data in the MCACC memory. For details, see Data Management
on page 83 .
! System Setup – Use this to make various settings related to this system. For details, see Making receiver set-
tings from the System Setup menu on page 86 .
! Network Information – The setting status of the network-related items can be checked. For detail, see
Checking the Network Information on page 89 .
! Operation Mode Setup – Use this to select this receiver’s operation mode. For details, see Operation Mode
Setup on page 39 .