Pioneer KEH-1940 - Manual (Page 8)

7
Tuner Operation
Local Seek Tuning
This function selects only stations with especially strong signals. The sensitivity can be
adjusted in 4 steps for FM and 2 steps for MW/LW.
FM : L-1
+= L-2 += L-3 += L-4
MW/LW : L-1
+= L-2
Note:
• The L-4 setting allows reception of only the strongest stations, while lower settings let you receive
progressively weaker stations.
• The Local Seek Level is indicated in the display for about 5 seconds.
• After selecting the Local Seek sensitivity if you do not perform an operation for more than 5
seconds, the Local Seek sensitivity selecting mode is automatically canceled.
• When you cancel the Local Seek sensitivity selecting mode, press the LOCAL button.
Best Stations Memory (BSM)
The BSM function stores stations in memory automatically.
Note:
• “ ” flashes in the display until BSM operation is completed.
• If there are fewer than 6 strong stations in the area, some of the preset buttons will not be assigned
frequencies, so they will retain any frequencies assigned to them previously.
• To cancel the process, press the BSM button before memorization is
complete.
• Press the BSM button for 2
seconds to switch BSM ON.
The stations with the strongest
signals will be stored under buttons
1–6 and in order of their signal
strength.
3. Select the desired Local Seek
sensitivity with the
2/3
buttons.
2. Enter the Local Seek
sensitivity selecting mode by
pressing the LOCAL button
for 2 seconds.
“LOC”
1. Switch the Local ON or OFF
with the LOCAL button.