Pioneer XDJ-AERO - Manual (Page 9)

9
2-2. Effect (FX Single Mode)
No XDJ-AERO buttons SAMPLE LAUNCH
indicator status
Track Decks (Decks A and B) Remix Decks (Decks C and D) * 2
Function
When SHIFT button
is on
Function
When SHIFT button
is on
e BEAT control
Lit dimly Dry/Wet Single Effect Parameter2 Dry/Wet Single Effect Parameter2
Lit brightly Dry/Wet Single Effect Parameter2 Sample Volume Slot1 Sample Volume Slot3
f FX SELECT
(TRANS)
Lit dimly Effect On/Off — Effect On/Off —
Lit brightly Hot Cue1 Delete Hot Cue1 Slot1 * 3 Load From List
g FX SELECT
(FLANGER)
Lit dimly Effect Parameter Reset — Effect Parameter Reset —
Lit brightly Hot Cue2 Delete Hot Cue2 Slot2 * 3 Load From List
h FX SELECT
(ECHO)
Lit dimly Effect Button1 — Effect Button1 —
Lit brightly Hot Cue3 Delete Hot Cue3 Slot3 * 3 Load From List
i FX SELECT
(ROLL)
Lit dimly Effect Button2 — Effect Button2 —
Lit brightly Hot Cue4 Delete Hot Cue4 Slot4 * 3 Load From List
j LEVEL/DEPTH
Lit dimly Effect Parameter1 Effect Parameter3 Effect Parameter1 Effect Parameter3
Lit brightly Effect Parameter1 Effect Parameter3 Sample Volume Slot2 Sample Volume Slot4
3. Mixer
No XDJ-AERO buttons
Mixer
Function
k TRIM control Input Gain
l EQ [HI] control EQ (Hi)
m EQ [MID] control EQ (Mid)
n EQ [LOW] control EQ (Low)
o FILTER control Filter
p Channel fader Channel Fader
q HEADPHONES CUE * 4 Monitor On/Off
r Crossfader Cross Fader
s Crossfader curve
THRU Thru
Smooth
Sharp
t AUTO MIX Cruise Mode On/Off
4. Others
No XDJ-AERO buttons
Deck & Mixer
Function
u INFO/UTILITY DECK Change A C
o INFO/UTILITY DECK Change B D
*2 Operates when the XDJ-AERO’s mixer mode is set to “PC”. When the mixer mode is set to “PC”, deck switching is possible with the
INFO/UTILITY button and the four decks can be operated. To display TRAKTOR decks C and D, check “Show C&D” at “Preferences”
“Decks Layout” “Deck Layout”. To display the TRAKTOR mixer, check each of “EQ + Fader”, “Filter + Key + Gain + Cue + Balance” and
“Crossfader” at “Preferences” “Mixer” “Mixer Layout”.
*3 Operates as shown on the table below according to the slot status.
Slot status Function
empty Load From Deck
loaded Play
playing(One-shot) Stop
playing(Looped) Mute/Unmute
*4 When monitoring the sound over headphones, do so with the HEADPHONES MIX knob in TRAKTOR turned all the way to the CUE side.
• The amount of change in the sound and playing speed when such operations as scratching and pitch bending are performed differs
from when operations are performed on the XDJ-AERO alone.
• The various functions of TRAKTOR PRO 2 can be assigned to buttons on the XDJ-AERO by changing the mapping. For details, refer to
the TRAKTOR PRO 2’s operating instructions.
• MIDI channels 1 to 7 are used with this unit’s MIDI mapping file, so when using another CDJ player or a device of a different brand
connected to the computer by USB cable together with this unit, set the other device(s) MIDI channel(s) to “8” or higher.
• For instructions on setting the MIDI channel, see the respective device’s operating instructions.
<DRX1024-A>