Pioneer N-50-K - Manual (Page 3)

3
3 Use a proper USB cable to connect a computer to a device equipped with
DIGITAL IN USB connector, then turn on the power.
For more information regarding connections, check the Operating Instructions for this
device.
Depending on the device used, the name of the connection port may differ (“DIGITAL IN
USB”, “USB-DAC IN”, etc.).
AL OUT
COAXIAL OPTICAL COAXIAL
1 2
DIGITAL IN
DIGITAL IN
ADAPTER PORT
DC OUTPUT
for WIRELESS LAN
USB
(OUTPUT 5V
0.1A MAX)
(OUTPUT 5V
0.6A MAX)
AC IN
USB
A–type
B–type
* The illustration may appear differently, depending on the model used.
4 Switch the unit to the input source corresponding to the DIGITAL IN USB
port.
5 Execute the Setup program located in the root directory of the
decompressed folder.
The InstallShield wizard will appear.
• If an older version of this driver program is found on the computer, the InstallShield wizard
will display a “delete” option. In this event, follow the on-screen instructions to delete the older
version, then reboot your computer and once again install the new driver program.
• The menu illustrations shown in these Operating Instructions may differ from those actually
displayed.
6 Click on [Next].
7 Click on [Install].
The following screen will appear; wait until the step 8 instructions appear.
If the message “Windows protected your PC” appears, click on “More info” and then press
“Run anyway”.
Procedure continues.