BUSH DAB+ Digital Radio BR08DAB - Manual (Page 9)

Bush BR08DAB
Storing station presets
You can store up to 10 DAB+ and 10 FM stations in the preset
memories.
1. Press the „MODE‟ button to change to the mode that you
would like to store presets in (DAB+ or FM).
2. Tune your radio to the station that you would like to save to
a preset.
3. Press and hold the „PRESETS‟ button on the top of the radio
until you see the presets number flashing.
4. Press the or buttons to select the preset number that
you would like to store. Press the round „SELECT‟ button to
confirm.
Tune to a radio station preset
1. Press the „MODE‟ button to change to the mode that the
preset was stored in (DAB+ or FM).
2. Press the „PRESETS‟ button and press the or buttons to
scroll through the station preset stations.
3. Press „SELECT‟ when you see the station that you would to
listen to. The radio will instantly tune to that station and
begin to play.
Note: If no DAB+ or FM station has been stored under the preset,
the display will change to ‘Preset X empty’ and then revert to
the previously selected station.
Software version
The helpdesk may ask you for the software version of your
product.
1. Press the „MENU‟ button on the top of the radio.
2. Press the or buttons to scroll to „SW Version‟. Press
the round „SELECT‟ button to display the software version.
Factory Reset
You may need to carry out a reset to factory defaults. Please
note that all of your station presets will be deleted when you
reset your radio.
1. Press the „MENU‟ button on the top of the radio.
2. Press the or buttons to scroll to „RESET‟. Press the
round „SELECT‟ button to reset your radio.
8