Balance KH 391 - Manual (Page 8)

(1) Time mode
Time setting:
Hold SET for about 2 seconds to enter into Time Mode and set the 12 -24 Hour Mode. To change
this mode, press the
/
key. After the setting, press SET to save and enter into the hours setting.
To set hours, press
/
to change hour. After the setting, press SET to save and enter into the
minute setting. To set minutes, press / to change minute. After the setting, press SET to save
and reset second.
( 2) Body fat meter mode
In Time Mode, press MODE once to enter into the body fat meter mode.
Select user:
By pressing the UP key, you may switch to USER0, 1,…,10.
USER 0: This is a Guest (unspecific user) and the data and measurement value are not memorized.
USER 1 to 10: The basic information will be memorized and the measurement value is memorized
too (10 groups).
Setting user's basic information:
Select user (USER 0 to 10) and then press SET for 2 seconds to enter into setting mode for weight
(Fig1), height (Fig2), sex (Fig3) and age (Fig4) that go flashing. Use the
/ key to change setting.
After each setting, press SET to enter into the following, until successful setting (USER1 to10 will
memorize all basic information as set).
8