Behringer F-Control Audio FCA202 - Manual (Page 8)

8 F-CONTROL AUDIO FCA202 User Manual
2. Installation
Important Notes Concerning Installation
on a PC!
◊ To ensure that your FCA202 works properly, make sure
you install the drivers before connecting the hardware
to the computer. Otherwise, the hardware will not be
correctly identified and in some circumstances will not
work correctly.
◊ If you have already cable-connected your interface,
break the connection between the FCA202 and
your computer, and then restart your system.
Then, install the drivers as described in Chapter 2.2.
Connect your audio interface only after you have
successfully completed the installation.
2.1 System requirements
To work with the FCA202, your computer must fulfill the
following minimum requirements:
2.2 Installation under Windows XP
• Close all unnecessary programs before beginning the
installation process
• Insert the driver CD. Use Windows Explorer to select the
drive that contains the CD, and then start the setup file
• Follow the on-screen instructions and confirm that you
want to continue with the installation until this has
been completed
PC MAC
Intel or AMD CPU,
1 GHz or higher
G4 / G5, 800 MHz or higher
minimum 512 MB RAM minimum 512 MB RAM
6-pin or 4-pin FireWire
interface
6-pin or 4-pin FireWire
interface
Windows XP SP2
Mac OS X 10.3.9 (Panther)
or higher