Bradley Smoker EXD-2N - Manual (Page 8)

8
Express® Deck Lavatory System EXD-Series
EXD-2N
Installation Instructions
2/9/07 Bradley Corporation • 215-1542 Rev. E; EN 06-915
Installation Instructions continued . . .
Step 4: Connecting supply and drain
1. Connect the Vernatherm™ Thermostatic Mixing Valve as shown in Figure 5a.
2. Install the drain plug in the drain hole in the bowl (see Figure 5b).
3. Beneath the bowl, install the 1/8" rubber washer and the threaded tailpiece onto the drain plug.
4. Assemble the P-trap by connecting the 1-1/2" tubular pipe to the tailpiece and to the 1-1/2" drain
pipe stubbed out of the wall (see Figure 5c).
5. Install the strainer on the drain plug opening inside the bowl using the #8 screw.
P-TRAP
STRAINER
TAILPIECE
FRAME (FRONT)
45˚
Figure 5c
VERNATHERM™
BRACKET
#10 SCREW
VERNATHERM™
VALVE
1/2" FLEXIBLE
HOSE
CHECK/STOP
VALVE
1/2" NPT
COLD SUPPLY HOT SUPPLY
H
C
Figure 5a
Figure 5b
STRAINER
BOWL
1/8"
RUBBER
WASHER
DRAIN
PLUG
TAILPIECE
#8 SCREW