Toshiba Qosmio G30 HD-DVD (PQG31) - Manual (Page 117)

User’s Manual 6-13
Power
To remove a discharged battery, follow the steps below.
1. Save your work.
2. Turn the computer’s power off. Make sure the Power indicator is off.
3. Remove all cables connected to the computer.
4. Close the LCD display panel and turn the computer upside down.
5. Slide the battery safety lock towards the release (
) position to make
the battery release latch movable.
Releasing the battery pack (1)
6. Slide the battery release latch (1) to free the battery pack for removal
(2), then slide out the battery pack.
Releasing the battery pack (2)
■ Do not remove the battery pack while the computer is in Standby mode.
Data is stored in RAM, so if the computer loses power it will be lost.
■ In Hibernation mode, data will be lost if you remove the battery or
disconnect the AC adaptor before the save is completed. Wait for the
HDD indicator to go out.
■ Do not touch the battery release latch while holding the computer or the
battery pack might fall out due to the unintentional release of the
battery release latch and cause injuries.
Battery pack
Battery safety
lock
Battery pack
Battery release
latch