Toshiba DV734 - Manual (Page 17)

17
*DTV auto tuning/Setting Antenna or Cable
(continued)
Note:
• All the channels will
be deleted before the
scanning process
begins.
• You can cancel the
scan process at any
time by pressing
EXIT/CANCEL
.
The carriers and the
services stored before
EXIT/CANCEL
is
pressed will be stored.
(2) The auto scan process will now begin. A progress
bar appears to indicate scanning progress.
*
Setting Cable:
(1) When Ant/Cable In is set to Cable, a list of
setting options will be displayed.
Note:
• This setting cannot be enabled due to DVB-C
unavailability. Please check if this function is
supported in the place you live, and if the latest
firmware has been installed on your TV (see
DVB-
C Notice on page 2 and DVB-C function notice on
page 12).
With the exception of Scan Type and Modulation, all of the settings have two options:
- Auto: Values are pre-set by the TV’s operating system.
- Input: Allows a single value to be entered in place of the pre-set value. If no channel is
currently tuned and Input is chosen a system default value will be displayed. If a channel is
currently tuned and Input is chosen the value of the channel will be displayed.
• Scan Type: There are two options, Full Scan and Quick Scan. Quick Scan is a simplified
version of Full Scan and takes less time to complete.
• Start Frequency: This sets the frequency from which the scan will start.
• End Frequency: This sets the frequency at which the scan will stop. The valid entry range
for frequency items is 113.000-858.000 for C-Book/Other and 114.000-858.000 for Nordig-C.
If a number outside of this range is entered the value will automatically set to a minimum or
maximum valid value.
• Modulation: There are six QAM modulation settings to choose from.
• Symbol Rate: This is the Baud rate (KS/s) of the scan. The valid entry range for Symbol Rate
is 4000-7200. If a number outside of this range is entered the value will automatically set to a
minimum or maximum valid value.
• Network ID: This is the Network ID to be used for the scan. This item will be disabled and
cannot be selected when the Scan Type is set to Full Scan.The valid entry range for Network
ID is 1-65535. If a number outside of this range is entered the value will automatically set to
a minimum or maximum valid value.
(2) Press to select Start to start auto scan.
7 Press EXIT/CANCEL to return to the normal screen.
DTV Channel Found 0
EXIT : Cancel
Radio Channel Found 0
Frequency(kHz) 642000
Auto Tuning
Scan Type Full Scan
Start Frequency Auto
End Frequency Auto
Modulation 64 QAM
Symbol Rate Auto
Network ID Auto
Start
/