Toshiba DVR18 - Manual (Page 25)

25 EN
In
trod
uct
ion
Co
nn
ect
io
n
s
Basic Setup
Pl
ayback
Ed
iti
n
g
V
CR Fu
ncti
on
s
O
th
ers
Fu
nc
ti
on
Set
u
p
Recordi
n
g
Skip a Preset Channel
You can set the unit to skip channels. You can no
longer receive or watch when you access channels
using [PROG.
/ ].
1 Follow steps 1 to 4 in “Manual
Tuning (ANALOG)” on the previous
page.
2
Select “Position” using [ U / D], then
press [ P].
3
Select the position number you want
to skip using [the Number buttons]
or [
U / D], then press [L].
4 Select “Skip” using [ U / D], then
press [ P].
5
Select “ON” using [ U / D], then
press [ L].
• To skip another channel, repeat steps 2 to 5.
6
Press [SETUP] to exit.
Move
You can replace two channels.
1 In stop mode, press [SETUP]. Select
“General Setting” using [
U / D],
then press [ENTER / OK].
2
Select “Channel” using [ U / D], then
press [ENTER / OK].
3
Select “ANALOG Channel Setup”
using [
U / D], then press
[ENTER / OK].
4 Select “Move” using [ U / D], then
press [ENTER / OK].
5
Select the position number that you
wish to move the channel to using
[
U / D], then press [ENTER / OK].
You cannot select a position number where
“– – –” appears next to the number, because
“Skip” is set to “ON” for that position number.
6
Move the channel to another
position number using [
U / D], then
press [ENTER / OK].
• To move another channel, repeat steps 5 to 6.
7 Press [SETUP] to exit.
Auto Tuning (DVB)
You can programme the tuner to scan only the DVB
channels that you can receive in your area.
1
In stop mode, press [SETUP]. Select
“General Setting” using [
U / D],
then press [ENTER / OK].
2
Select “Channel” using [ U / D], then
press [ENTER / OK].
3 Select “DVB Channel Setup” using
[
U / D], then press [ENTER / OK].
4
Select “Auto Tuning” using [ U / D],
then press [ENTER / OK].
The unit will start storing channels available in
your area.
The tuner scans and memorises all the active
DVB channels (TV / Radio) in your area.
.
• Press [ENTER / OK] after Auto Tuning is
completed, then the lowest memorised DVB
channel appears on the screen.
5 Press [SETUP] to exit.
You can use [PROG. / ] for the memorised
DVB channels.
Note
• If you press [RETURN / BACK] during the
scanning, the screen will return to the previous
displayed menu, and Auto Tuning will be cancelled.
• If you press [SETUP] during the scanning, this
operation will stop and the lowest memorised DVB
channel will appear on the TV screen.
ANALOG
ANALOG
DVB
DVB Channel Setup
Edit Channels
Auto Tuning
Manual Tuning
Signal Information
S. No. TV channel
1
2
3
4 E4
ITV1 701 BBC Radio 1
Classic FM
ITV2
Channel
Channel48 UHF
S. No. Radio channel
702
703
704
Magic Radio
BBC Radio 2
690000kHz/8M
60%
Channel search
Progress
E9NG1BD_EN.book Page 25 Monday, April 7, 2008 5:54 PM