When writing or rewriting – Toshiba Satellite M40 (PSM42) User Manual
Page 78
4-14
User’s Manual
Operating Basics
TOSHIBA has confirmed the operation of CD-R and CD-RW media of the
manufacturers above. Operation of other media cannot be guaranteed.
■
CD-RW can generally be rewritten about 1,000 times. However, the
actual number of rewrites is affected by the quality of the media and
the way it is used.
■
Be sure to connect the AC adaptor when you write or rewrite.
■
Be sure to close all other software programs except the writing
software.
■
Do not run software such as a screen saver which can put a heavy
load on the CPU.
■
Operate the computer at full power. Do not use power-saving
features.
■
Do not write while virus check software is running. Wait for it to
finish, then disable virus detection programs including any software
that checks files automatically in the background.
■
Do not use hard disk utilities, including those intended to enhance
HDD access speed. They may cause unstable operation and
damage data.
■
Write from the computer’s HDD to the CD. Do not try to write from
shared devices such as a LAN server or any other network device.
■
Writing with software other than RecordNow! has not been
confirmed. Therefore, operation with other software cannot be
guaranteed.
When writing or rewriting
Note the following when you write or rewrite a CD-R or CD-RW.
■
Always copy data from the HDD to the CD. Do not use cut-and-paste.
The original data will be lost if there is a write error.
■
Do not perform any of the following actions:
■
Change users in the Windows XP operating system.
■
Operate the computer for any other function, including use of a
mouse or Touch Pad, closing/opening the LCD panel.
■
Start a communication application such as a modem.
■
Apply impact or vibration to the PC.
■
Install, remove or connect external devices, including the following:
PC card, USB devices, external display, i.LINK devices, optical
digital devices.
■
Open the optical media drive.
■
If the media is poor in quality, dirty or damaged, writing or rewriting
errors may occur.
■
Set the computer on a level surface and avoid places subject to
vibration such as airplanes, trains, or cars. Do not use an unstable
surface such as a stand.
■
Keep mobile phones and other wireless communication devices away
from the computer.