Placing slim size remote controller, Slim size remote controller, Inserting a slim size remote controller – Toshiba SATELLITE U400 User Manual

Page 49: Remove a slim size remote controller

Advertising
background image

User’s Manual

2-16

The Grand Tour

Slim size remote controller

1. Open the battery cover on the back side of the remote controller.
2. Hold down the stopper and slide the battery out of battery case.

Removing the batteries

3. Insert the battery in place. Be sure to place the batteries with correct

polarities. Press the battery down to the stopper then push it forward to

fit into the battery case.

4. Close the battery cover. Close the cover securely until it clicks.

Placing slim size remote controller

Inserting a slim size remote controller

To insert the slim size remote controller, follow the steps below.
1. Make sure the ExpressCard slot is empty.
2. Set the front side upward and insert the slim size remote controller.

Inserting the slim size remote controller

3. Press gently to ensure a firm connection.

Remove a slim size remote controller

To remove the slim size remote controller, follow the steps below.
1. Press the slim size remote controller slightly to make it stretch out.
2. Grasp the slim size remote controller and pull it out from the slot.

Stopper

Battery

Slim size remote

controller

Advertising
This manual is related to the following products: