Using the function buttons, Using the function buttons -4, Starting the usb sleep and charge utility – Toshiba SATELLITE U500 User Manual
Page 68: Enabling usb sleep and charge, Battery settings
4-4
User’s Manual
Satellite U500/U500D, Satellite Pro U500/U500D
Starting the USB Sleep and Charge Utility
To start the utility, click Start -> All Programs -> TOSHIBA -> Utilities
USB -> Sleep and Charge.
Enabling USB Sleep and Charge
This utility can be used to enable and disable the USB Sleep and Charge
function. Check the “USB Sleep and Charge” checkbox. In the default
state, this function is disabled.Power supply mode settings
There are several USB Sleep and Charge function modes. “Mode 4
(Default)” should normally be used. Set one of the other modes (try from
“Mode 3” to “Mode 1”)
*1
if the charge function cannot be used in “Mode 4
(Default)”. This function may not be able to be used with some connected
external devices even if the appropriate mode is selected. In this situation,
uncheck the “USB Sleep and Charge” checkbox and stop using this
function.
*1
Some mode may not be displayed in the list.
Battery Settings
This utility can be used to specify the lower limit of remaining battery life for
USB Sleep and Charge. Move the slider bar to specify the lower limit. If the
remaining battery life falls before the setting, the “USB Sleep and Charge”
function will be stopped. Unchecking the “Enable under Battery Mode”
checkbox sets the utility to only charge when the AC adaptor is connected.
Using the Function buttons
This section describes the Function buttons.
Seven buttons are provided with some models.
Icon
Function button
DVD
*CD/None
ECO
CD/DVD
Launch TOSHIBA
DVD PLAYER
Launch Windows
Media Player
Play/Pause
Play/Pause
Play/Pause
Previous
Previous chapter
Previous track
Next
Next chapter
Next track
LED on/off
Volume UP and
DOWN
Volume UP/
DOWN
Volume UP/Down