Lan -5, Disconnecting – Toshiba Satellite L40 User Manual

Page 53

Advertising
background image

User’s Manual

4-5

Basic Operations

1. Plug one end of the modular cable into the modem jack.
2. Plug the other end of the modular cable into a telephone jack.

Disconnecting

To disconnect the internal modem cable, follow the steps below.
1. Pinch the lever on the connector in the telephone jack and pull out the

connector.

2. Disconnect the cable from the computer in the same manner.

LAN

The computer is equipped with networking hardware that supports Ethernet

LAN (10 megabits per second, 10BASE-T), and Fast Ethernet LAN

(100 megabits per second).

Do not pull on the cable or move the computer while the cable is

connected.

If you use a storage device such as an optical media drive or hard disk

drive connected to a 16-bit PC Card, you may find that the modem speed

is slow or the communication session might be interrupted.

If you find that the modem speed is low or communication is interrupted

when you are using the modem, set the CPU speed to Maximum within the

Power Options.

Do not install or remove an optional memory module while the Wake-up on

LAN feature is enabled.

The Wake-up on LAN feature does not work on battery power, you should

always leave the computer connected to the AC adapter if you are using

this feature.

Advertising
This manual is related to the following products: