Toshiba Qosmio G30 HD-DVD (PQG32) - Manual (Page 189)

User’s Manual 9-7
Optional Devices
Removing an SD Card
To remove an SD Card, follow the steps as detailed below:
1. Open the Safely Remove Hardware icon on the Windows Task Bar.
2. Point to SD Card and click the left Touch Pad control button.
3. Press the SD Card to partially extend it out of the computer.
4. Grasp the SD Card and remove it.
Removing an SD Card
SD Card care
■
Do not write to an SD Card if the computer’s battery power is low as this
may affect writing accuracy.
■
Do not remove an SD Card while a read/write operation is in progress.
■
The SD Card is designed so that it can only be inserted into the
computer one way - do not try to force the SD Card into the SD Card
slot.
■
Make sure the SD Card is oriented properly before you insert it.
■
Make sure that the SD card is facing the correct direction when
inserting it into the Bridge media slot.
■
Do not turn the computer off or switch to Standby Mode or Hibernation
Mode while files are being copied - doing so may cause data to be lost.
SD Card
Bridge media slot
■
Make sure the Media slot indicator is out before you remove the SD
Card or turn off the computer’s power. If you remove the SD Card or
turn off the power while the computer is accessing the SD Card you
may lose data or damage the card.
■
Do not remove an SD Card while the computer is in Standby or
Hibernation Mode. The computer could become unstable or data in the
SD Card could be lost.
Set the write-protect switch to the lock position, if you do not want to record
data.