Toshiba Portege R200 (PPR21) User Manual
Page 34
User’s Manual
2-5
The Grand Tour
LAN jack
This jack lets you connect to a LAN. The adaptor
has built-in support for Ethernet LAN (10
megabits per second, 10BASE-T), Fast Ethernet
LAN (100 megabits per second, 100BASE-TX)
and Gigabit Ethernet LAN (1000 megabits per
second, 1000BASE-T). The LAN has two
indicators. Refer to Chapter 4,
,
for details.
The LAN jack of the Slim Port Replicator supports Ethernet LAN
(10 megabits per second, 10BASE-T) and Fast Ethernet LAN
(100 megabits per second, 100BASE-TX). Gigabit Ethernet LAN
(1000 megabits per second, 1000BASE-T) is not supported.
■
Do not connect any cable other than a LAN cable to the LAN jack.
It could cause damage or malfunction.
■
Do not connect the LAN cable to a power supply. It could cause
damage or malfunction.
Link indicator (green) This indicator glows green when the computer is
connected to a LAN and the LAN is functioning
properly.
LAN active indicator
(orange)
This indicator glows orange when data is being
exchanged between the computer and the LAN.
External monitor port This external monitor port lets you connect an
external video display.
After you have connected the Slim Port Replicator to the computer, be sure
to connect the monitor cable to the external monitor port of the Slim Port
Replicator, instead of an external monitor port on the back side of the
computer.
DC IN 15V jack
The AC adaptor connects to this jack. Use only
the model of AC adaptor that comes with the
computer. Using the wrong adaptor can damage
your computer.
Universal Serial Bus
(USB 2.0) port
Two Universal Serial Bus ports are on the back
side. The ports comply with the USB 2.0
standard, which enables data transfer speeds
40 times faster than the USB 1.1 standard
(The ports also support USB 1.1).