Dla for toshiba – Toshiba Satellite Pro L100 (PSLA1) User Manual

Page 84

Advertising
background image

4-14

User’s Manual

Operating Basics

You might not be able to use the “Exact Copy” function of RecordNow!

to back up a DVD-R/RW or DVD+R/+RW disc that was made with other

software on a different DVD-R/RW or DVD+R/+RW recorder.

If you add data to a DVD-R and DVD+R disc that you have already

recorded to, you might not be able to read the added data under some

circumstances. It cannot be read in 16-bit operating systems, such as
Windows

®

98SE and Windows

®

ME. In Windows

®

NT4, you will need

Service Pack 6 or later to read added data. In Windows

®

2000, you will

need Service Pack 2 or later to read it. Some DVD-ROM and

DVD-ROM & CD-R/RW drives cannot read added data regardless of

the operating system.

RecordNow! does not support recording to DVD-RAM discs. To record

to a DVD-RAM, use Explorer or other utility.

When you back up a DVD disc, be sure the source drive supports

recording to DVD-R/RW or DVD+R/RW discs. If the source drive does

not support recording to DVD-R/RW or DVD+R/RW discs, it might not

be backed up correctly.

When you back up a DVD-R, DVD-RW, DVD+R or DVD+RW, be sure to

use the same type of disc.

You cannot partially delete any data written to a CD-RW, DVD-RW or

DVD+RW disc.

Data written to a CD-R/DVD-R/DVD+R disc cannot be deleted either in

whole or in part.

Data Verification

To verify that data is written or rewritten correctly, follow the steps below

before you write or rewrite a data CD/DVD.

1. Click the Options button (

) on the RecordNow! Console to open the

Options panels.

2. Select the Data in the left-side menu.
3. Mark the Verify data written to the disc after burning check box in

the Data Options.

4. Click OK.

DLA for TOSHIBA

Note the following limitations when you use DLA:

This software supports only rewritable discs (DVD+RW, DVD-RW, and

CD-RW). It does not support DVD+R, DVD-R, and CD-R discs that are

not rewritable.

DLA does not support formatting the DVD-RAM disc and writing to it.

They are performed by DVD-RAM Driver Software. The proper software

works according to the disc inserted in the drive.

Advertising
This manual is related to the following products: